Panasonic Madht1505 200V Motor Driver for Kohyoung Aoi Spi

• Mode of Production: SMT
• Customized: Non-Customized
• Condition: New
• Model NO.: MADHT1505
• Delivery Time: 1-7days
• MOQ: 1unit
• Part No.1: Mitsubishi Mr-J2s-10A 100W AC Servo Motor Driver
• Part No.2: Panasonic Madht1507la1 200V AC Servo Driver for Ko
• Part No3: Panasonic Mbdht2510 200V AC Servo Driver for Kohyo
• Part No4: SMT Cutter-1
• Part No5: Mitsubishi Mr-J3-70A 750W AC Servo Motor Driver Fo
• Transport Package: Carton
• Specification: detection speed can reach 0.5-3 seconds per board
• Trademark: SCANSMT CO
• Origin: China

Product Description

Product Description

AOI SPI

AOI introduction:

AOI (Automated Optical Inspection, automatic optical inspection) is a device that uses optical imaging and image analysis technology to automatically detect problems such as soldering defects, component errors and omissions, and polarity errors on PCBS (printed circuit boards). It is widely used in SMT (Surface Mount Technology) production lines, mainly for quality inspection after soldering or placement, to ensure product yield and reduce the cost of manual re-inspection.AOI has become an indispensable quality control tool in modern electronic manufacturing. By integrating AI and 3D technologies, it will further enhance the efficiency and accuracy of detection in the future.
 

AOI advantages:

High Detection accuracy: Micron-level detection capability, capable of identifying defects in tiny components such as 01005 (0.4×0.2mm).
 

High-speed Inspection: It can inspect hundreds to thousands of solder joints per second, far exceeding the human eye (manual inspection takes about 5-10 seconds per board).
 

Reduce labor costs: Decrease the number of visual inspection personnel to lower the rate of missed inspections (the rate of missed inspections by manual visual inspection is approximately 10%-30%, and AOI can be reduced to below 1%).
 

Data Traceability: Record inspection data, support SPC (Statistical Process Control) analysis, and optimize production processes.
 

Adapted to high-density PCBS: Suitable for complex packages such as BGA, QFN, and PoP, which are difficult for traditional manual inspection to handle.
 

Reduce rework costs: Detect defects early to prevent defective products from flowing into subsequent processes (such as DIP insertion or testing stages).

SPI introduction:

SPI (Solder Paste Inspector) is an automated optical inspection device used to test the quality of paste printing on PCBS. It measures the thickness, area, volume and position offset of solder paste through high-precision 3D scanning technology, ensuring that the solder paste printing before SMT (Surface Mount Technology) placement meets the standards and reducing soldering defects.
 

SPI advantages:

Improve Solder yield: Detect solder paste defects in advance to reduce false soldering, bridging and other defects after reflow soldering (can reduce solder defects by more than 50%).
 

Reduce production costs: Minimize rework and scrapping caused by defective solder paste, and optimize material usage (such as solder paste costs).
 

Enhance Placement Accuracy: Ensure the accurate position of solder paste to increase the success rate of subsequent SMT placement.
 

Data Traceability: Record inspection data, support SPC (Statistical Process Control), and optimize steel mesh design and printing parameters.
 

Adapted to micro-pitch components: Can detect the solder paste quality of tiny pads such as 01005 (0.4×0.2mm), CSP, BGA, etc.
 

High-speed Detection: The detection speed can reach 0.5-3 seconds per board, suitable for high-speed SMT production lines (such as Fujifilm NXT placement machine production lines).

Main Product

Company Profile

SCANSMT CO.,LTD is located in HongKong, established in Shenzhen,China.We are providing SMT total line solution and SMT machine parts.We are Chinese local stocking dealer who specialise in AOI and SPI and Mounters.We mainly buy and sell used Kohyoung,Mirtec, Parmi, Pemtron, Cyberoptics ,Saki,TRI AOI and SPI. Samsung, Panasonic, Yamaha, Juki, Fuji, Siemens,ASM, Hitachi Mounters around 12 years.We have two over 400 square meters warehouse to setting up these used machines.And also, our bussiness contains supply brand new Chinese made Reflow,Printer, loader and unloader, NG/OK buffers,work table, conveyors.In addition, we have good experienced engineers can provide repair Heads, Monitor, control box, boards, drives .our machines price and quality are balanced,but our service is beyond the price.We will very happy to see yo soon.Thanks.

Why Choose Us

Packaging & Shipping

FAQ

Q1. All of the listed equipment provided in your company's inventory?
Most of the used AOI and SPI and Mounters are right. Brand new machines are not.

Q2.What is minimum quantity?
At least 1 pieces.

Q3.When will the goods be delivered?
It usually takes 1-3 days after receiving the payment.

Q4.How long is the warranty period?
Used machines can warranty the spare parts for 3 months. Brand new Chinese made machines are 6 months to 1 year.

Q5.What is the payment method?
Only available T/T

Q6.What is the transportation method?
Machines are tranported by sea, spare parts by air.